Tutorials

  • Assemblies ×
  • Simulation & CAE ×
  • Autodesk Inventor ×
  • Fusion 360 ×
  • Kompas-3D ×
  • tutorial ×

[VIDEO] Bending Plate Animation Inventor 2020 Tutorial

Didi Widya Utama
in Assemblies
33 1 Intermediate
This tutorial will show how to create a bending process of a plate in animation, hope this video will give you clear explanation. please leave comment below
Autodesk Inventor studio animation plate bending tutorial 2020 inventor autodesk

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

Engineering Juice
in Assemblies
10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.
Fusion 360 robotics tutorial 360 fusion

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

Engineering Juice
in Assemblies
6 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)
Fusion 360 robot robotics lesson tutorial 360 fusion

Static Simulation in Fusion 360! Bicycle Crank Arm Tutorial

Engineering Juice
in Simulation & CAE
5 0 Beginner
0:25 Simulation Start 0:56 Simplify 1:31 Materials 2:02 Constraints 2:58 DOF View 3:23 Loads 4:52 Solve In this tutorial, we will create a static simulation for our bicycle crank arm in Autodesk Fusion 360. We will simplify our assembly, to remove the fittings, then add a material, constraints and a load to the end of the arm. When we solve our assembly, we will end up with the amount of deformation. We will then run the simulation again once we core out the inside of our crank arm to see the difference in the analysis.
Fusion 360 static simulation tutorial lesson 360 fusion

Inventor 2021 | Radial Engine

CAD Pond
in Assemblies
5 1 Beginner
Radial engine model created with Inventor. 3D Model. Art.
Autodesk Inventor airbus tutorial inventor engine radial aviation boeing airforce aircraft

How to Package Electronic Components in Fusion 360: Tutorial

Engineering Juice
in Assemblies
5 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360
Fusion 360 tutorial 360 fusion

Static Stress Simulation: I-Beam Bending in Fusion 360! Tutorial

Engineering Juice
in Simulation & CAE
3 0 Beginner
How to do a static stress simulation on an I-beam in Fusion.
Fusion 360 beginner 2019 sketch modeling tutorial 360 fusion fusionsimulation

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

Engineering Juice
in Assemblies
3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.
Fusion 360 printing print 3d screw gears motor dc design tutorial 360 fusion

Inventor 2021 | Radial Engine | Assembly 15

CAD Pond
in Assemblies
2 1 Beginner
In this video, I complete the assembly of the radial engine project. Parts used in this video are referenced below. Happy Modeling!
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft

How to Make a DC Motor & Sprocket Assembly: Fusion 360 Robotics Tutorial for Beginners (Robot Part 3)

Engineering Juice
in Assemblies
2 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time. Buy this chain for projects: https://amzn.to/3f2FZEl
Fusion 360 project robotics assemblies beginner tutorial 360 fusion

Fusion 360 Thermal Simulation Tutorial- Loads and Constraints Coffee Mug Part 2

Engineering Juice
in Simulation & CAE
2 0 Beginner
#Coffee #ThermalConduction #ThermalSimulation Music is from Youtube free library. -This is a thermal load simulation.
Fusion 360 thermal simulation tutorial 360 fusion

Inventor 2021 | Radial Engine | Assembly 12

CAD Pond
in Assemblies
1 0 Beginner
In this video, I demonstrate how to attach the intake and exhaust subassemblies, along with other parts to the crank subassembly of the radial engine project. Parts used in this video are referenced below.
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft

Inventor 2021 | Radial Engine | Assembly 13

CAD Pond
in Assemblies
1 0 Beginner
In this video, we modify the cam housing part, and create the cam-housing sub-assembly of the radial aircraft engine project. Parts used in this video are referenced below. Happy Modeling!
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft

Inventor 2021 | Radial Engine | Assembly 14

CAD Pond
in Assemblies
1 0 Beginner
In this video, I demonstrate the process of including the cam-subassembly and gears to the radial engine. Parts used in this video are referenced below. Happy Modeling!
Autodesk Inventor tutorial inventor engine radial aviation boeing airforce aircraft

Heavy Duty Truck Rack

Cuauhtemoc Bravo
in Assemblies
1 0 Beginner
Create a Rack for F150 truck on Autodesk Inventor. -Create surface body part as main geometry. -Create a new assembly and place the surface body -Within the assembly create a new part and use the surface body as a reference to sketch the faces of the sheet metal part. -Use the Rip tool to create a seam and allow unfolding into flat pattern part.
Autodesk Inventor f150 rack truck metal sheet tutorial inventor autodesk
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.