How to do thermal ands static simulation on cantilever and Simply Supported Beam

0 0 Beginner
Hello everyone, in this simple short video, i've shown a process of using static and thermal stress simulation using Autodesk Fusion 360 . and there are somethings in the model which i overlooked as this tutorial is meant for beginners, so i've tried to keep it very simple. so follow the video till last.

Fusion 360 Thermal Simulation Tutorial- Loads and Constraints Coffee Mug Part 2

2 0 Beginner
#Coffee #ThermalConduction #ThermalSimulation Music is from Youtube free library. -This is a thermal load simulation.

Static Simulation in Fusion 360! Bicycle Crank Arm Tutorial

5 0 Beginner
0:25 Simulation Start 0:56 Simplify 1:31 Materials 2:02 Constraints 2:58 DOF View 3:23 Loads 4:52 Solve In this tutorial, we will create a static simulation for our bicycle crank arm in Autodesk Fusion 360. We will simplify our assembly, to remove the fittings, then add a material, constraints and a load to the end of the arm. When we solve our assembly, we will end up with the amount of deformation. We will then run the simulation again once we core out the inside of our crank arm to see the difference in the analysis.

Static Stress Simulation: I-Beam Bending in Fusion 360! Tutorial

3 0 Beginner
How to do a static stress simulation on an I-beam in Fusion.

Design of Geneva Wheel Mechanism with MOTION ANALYSIS in UNIGRAPHICS

5 0 Intermediate
A mechanism which used in motion picture film projectors to intermittently advance film through a film gate having a projection aperture. The film is moved or advanced by a Geneva Mechanism (also known as a “Maltese Cross”) until an image frame is in alignment with the projection aperture. Link to join our community: https://www.youtube.com/channel/UCVbjnpjSOH2BrLBYhqdXW4g?sub_confirmation=1