Tutorials

  • Alibre Design ×
  • Bentley MicroStation ×
  • BobCAD-CAM ×
  • ZW3D ×

Rookie to Rocking it: A Masterclass in 3D Sketching in Alibre Design

Konstantinos Froudarakis
in Modeling
0 4 Expert
A 3D Sketching Masterclass for Alibre where almost every aspect of 3D sketching is discussed. After watching this you'll be able to Draw almost anything in 3D sketch in Alibre, allowing you to create complex parts with ease.
Alibre Design tangent spline degrees of freedom elevation 3d sketch

How to convert STL data into a surface model in ZW3D with one command?

Stefan Varga
in Design & CAD
3 3 Beginner
The procedure in detail:
ZW3D shape solid surface stl conversion point cloud

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 3

CAD Thinkers
in Modeling
1 2 Beginner
Sheet Metal Exercise 3 - Beginners In this beginner video I will not look into the K-Factor. - Sketch and tools within the sketch environment such as: - Line - Slot - Offset - Point - Trim/Extend - Dimensions - Constraints - Extrude - Flange - Hole - Draft - Fillet - Chamfer - Punch - Mirror Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D sheetmetal 3dcaddesign 3dcadmodelling zw3dtutorial cadtutorial cad zw3d 3dcad

What is 'BobCAD-CAM' and how to start up with it?

MI Ilmy
in Design & CAD
0 2 Expert
Introduction to 'BobCAD-CAM' and how this how to create a basic drawing using this software.
BobCAD-CAM manufacturing development product bobcad-cam

FDCSDGF

U R
in Modeling
0 2 Beginner
DFGG
Alibre Design dsfgdsf

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 2

CAD Thinkers
in Modeling
2 1 Beginner
Sheet Metal Exercise 2 - Beginners In this beginner video I will not look into the K-Factor. - Sketch and tools within the sketch environment such as: - Line - Circle - Rectangle - Mirror - Offset - Trim - Reference - Dimensions - Constraints - Extrude - Flange - Fillet - Chamfer - Unfold/Fold Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad zw3d cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign sheetmetal

Proper Method to Produce Lobster-back Duct Bends

lawrie
in Drafting
3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing
Alibre Design

ZW3D Spoon Modeling

Muhamad Zen
in Modeling
1 1 Intermediate
ZW3D Spoon Modeling
ZW3D muhamad_zen12 zen muhamad zw3d

ZWCAD Tips | Use Block Attribute to create a customized component library

Iris Chan
in Drafting
2 1 Beginner
Want to access your frequently used components more quickly? In addition to a library of standard parts, ZWCAD offers Block Attribute for designers and engineers to customize component blocks and create their own component libraries. This function can considerably reduce repetition and enhance your work efficiency.
ZW3D component block drafting zwcad

ZW3D Tutorial - Beginner level - Exercise 4

CAD Thinkers
in Modeling
2 1 Beginner
Exercise 4 - Beginners - Sketch and tools within the sketch environment such as: - Line - Trim/Extend - Dimensions - Constraints - Curve List - Extrude - Mirror - Hole - Fillet - Combine Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D cadcam zw3d cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign surfacemodelling

ZW3D Tutorial - Beginner level - Sheet Metal - Exercise 1

CAD Thinkers
in Modeling
1 1 Beginner
Sheet Metal Exercise 1 - Beginners In this beginner video I will not look into the K-Factor. - Sketch and tools within the sketch environment such as: - Double lines - Circle - Copy - Offset - Trim/Power Tim - Dimensions - Constraints - Extrude - Fillet - Louver - Mark Bend - Unfold Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D sheetmetal 3dcaddesign 3dcadmodelling zw3dtutorial cadtutorial cad zw3d 3dcad

ZW3D Tutorial - Beginner Level - Exercise 1

CAD Thinkers
in Modeling
6 1 Beginner
Welcome to the very first video on Cad Thinkers. This video is a beginner level video of a simple part designed on ZW3D. We will be looking at how to create a file and a part and then we will move on to creating Sketches and solid modelling tools. This is my first video so I apologise in advance for and minor mistakes and mispronunciation of certain words. I hope you enjoy and thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D surfacemodelling 3dcaddesign 3dcadmodelling zw3dtutorial cadtutorial cad zw3d cadcam

ZW3D Tutorial - Beginner level - Exercise 2

CAD Thinkers
in Modeling
1 1 Beginner
In this exercise we will do a simple L-shaped part and we will go over the following feature: - Sketch and tools within the sketch environment. - Extrude - Curve List - Fillet Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D cadcam zw3d cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign surfacemodelling
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.