Tutorials

  • AutoCAD Electrical ×
  • Autodesk 123D ×
  • SpaceClaim ×

SpaceClaim basic tutorial - spring

Verislav Mudrak
in Design & CAD
9 0 Beginner
How to make spring in SpaceClame
SpaceClaim tutorial basic spaceclaim

Tutorial: How to quickly add motion dynamics to any CAD model in SpaceClaim

Oskar Q
in Design & CAD
5 0 Beginner
Tutorial below
SpaceClaim tipsntricks

Electrical Switch

Shubashis Sen
in Design & CAD
2 0 Beginner
In this tutorial, I am going to explain step by step how to design an Electrical switch design in AutoCAD. This is basically for controlling many appliances at the same time. so you can call it a multiple switch box. The measurements are as you want.
AutoCAD Electrical autocad electrical multiple switch electrical switch electrical cad electrical

SpaceClaim basic tutorial - variable spring

Verislav Mudrak
in Design & CAD
2 0 Beginner
SpaceClame basic tutorial - how to make variable spring
SpaceClaim spring variable tutorial basic spaceclaim

AUTOCAD ELECTRICAL - CUADRO GENERAL DE PROTECCION

Chrisjcm
in Design & CAD
2 2 Beginner
El video esta basado en el ejercicio "Cuadro general de protección" del libro "Automatismos Industriales" de Juan Carlos Martín y María Pilar García, página 94.
AutoCAD Electrical electrical

AutoCad Electrical-2018 for Students,Beginners

Prajwith Ullal
in Modeling
2 0 Beginner
Autocad Electrical-2018 2D design Tutorial. I am Electrical Engineering Student from Karnataka(India), As a learner I have started creating tutorial, Please support me to grow up, please comment your suggestions. share the tutorial with your friends circle. Thank You.
AutoCAD Electrical electrical students autocad

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

SpaceClaim basic tutorial - taper spring

Verislav Mudrak
in Design & CAD
2 0 Beginner
SpaceClame basic tutorial - how to make taper spring
SpaceClaim tutorial basic spaceclaim

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
1 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim

How to make twisted bar

Oleksandr
in Modeling
1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.
SpaceClaim bar twisted

INVENTOR TO AUTOCAD ELECTRICAL

Chrisjcm
in Design & CAD
1 0 Beginner
Creación de un esquema punto a punto en AUTOCAD ELECTRICAL desde un archivo XML generado en INVENTOR
AutoCAD Electrical inventor electrical autocad

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 51-55
SpaceClaim fireplace spaceclaim

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 71-75
SpaceClaim fireplace spaceclaim

Tutorial: How to model fireplace in SpaceClaim 2012

Tibor
in Design & CAD
0 0 Beginner
STEPS 6-11
SpaceClaim fireplace spaceclaim
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.