Tutorials

SpaceClaim basic tutorial - spring

9 0 Beginner
How to make spring in SpaceClame

Tutorial: How to quickly add motion dynamics to any CAD model in SpaceClaim

6 0 Beginner
Tutorial below

SpaceClaim basic tutorial - variable spring

2 0 Beginner
SpaceClame basic tutorial - how to make variable spring

SpaceClaim basic tutorial - taper spring

2 0 Beginner
SpaceClame basic tutorial - how to make taper spring

Use Ansys SpaceClaim to Model Twisted Pair Wire

2 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.

How to make twisted bar

1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 51-55

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 71-75

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 6-11

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 18-23

Tutorial: How to add tire on rim in Spaceclaim 2012

1 0 Beginner
STEPS 1-5

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 12-17

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 66-70

Tutorial: How to model fireplace in SpaceClaim 2012

0 0 Beginner
STEPS 56-60

S-shaped battery cooling geometry in ANSYS

0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.