Tutorials

  • Kompas-3D ×
  • OBJ ×
  • Pro/Engineer Wildfire ×
  • GrabCAD Workbench ×

How to convert CAD files in Workbench

Sar Dar
in Design & CAD
131 49 Beginner
How to convert file formats, such as sldprt and sldasm files, to STEP, IGES, STL, Parasolid (.x_t), ACIS (.sat), JT, or VRML (.wrl)
GrabCAD Workbench sldprt vrml jt acis parasolid stl iges step

Create an OBJ Cube With Your Favorite Images

Anirudh Krishnakumar
in Modeling
17 2 Beginner
Ever wanted to create a CAD file with your favorite pictures? There are many ways to apply images and textures to CAD files. However, for most of these operations, expensive programs or CAD experience might be required. This tutorial shows you how to make a simple OBJ cube, while explaining some of the basic OBJ nomenclature. It then explains the steps to map pictures on the cube's faces. The only tools you will need is a text editor like notepad and your favorite images!
OBJ photo cube cad map texture obj

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

How to use helical sweep cut to make threads in Pro-E\Creo ??

Saurabh Kumar
in Design & CAD
0 0 Beginner
Ok lets get started... Used a simple bolt....
Pro/Engineer Wildfire helical creo elements sweep threads proe learning

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

How to upload files to GrabCAD Workbench?

Stephen Nyberg
in Design & CAD
1 1 Beginner
Here is how I created a new Workbench project and a few different ways I uploaded SolidWorks files. This is was also my first time using the upload folders option so I came across a few bugs that I am sure will be worked out but they are not a big deal. Please feel free to leave comments if this worked for you or if you have a different or better way to do it. I will tell you how to start your Workbench project and upload SolidWorks files. I am assuming you know how to create your files. For this tutorial, I will upload a .zip file containing all of the part and assembly files. You can make this many ways but one of the best ways is to use the Pack-and-Go option in SW. Many other CAD programs have a similar option and this makes sure all the required files are included.
GrabCAD Workbench workbench upload

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench

How do i convert .SLDPRT to .STEP?

Baljeet Thakur
in Design & CAD
0 1 Beginner
Open the .sldprt file in solidworks that you want to save in any other format
Pro/Engineer Wildfire

How to model a Hexagonal Nut in Pro/E?

elamurugabarati
in Design & CAD
0 0 Beginner
here is the step by step instruction to create a hex nut in Pro engineer wildfire 5.0.
Pro/Engineer Wildfire nut hexagonal

how to make pattern along a curve?

Rajesh kumar
in Design & CAD
3 1 Beginner
The answer is here.
Pro/Engineer Wildfire

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
1 0 Intermediate
in modal analysis go to analysis setting than go rotodynamic check coriollis effect on than do campbell diagram on feed your data and solve it
GrabCAD Workbench

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

Repeat command in Assembly mode of proEngineer

c0cd00a1
in Design & CAD
0 0 Beginner
Here's a small tutorial on how to use the repeat command in proEngineer assembly mode..If we want to use a bolt of same dimension @ different locations (with same constraints)..then this command proves to be very useful..
Pro/Engineer Wildfire

how to roll back the model in proe5, is there any way like solid works

Charoenpon555
in Design & CAD
1 0 Beginner
See pic.
Pro/Engineer Wildfire

Using a reference image in pro e & creo elements to create a logo or symbol

prabhakaran
in Design & CAD
0 0 Beginner
continue
Pro/Engineer Wildfire reference creo engineer pro importing image import tracing
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.