Tutorials

  • BlenderCAD ×
  • Powermill ×
  • PTC Creo Elements ×
  • SpaceClaim ×

Using Blender for Technical design

Christie S
in Modeling
22 2 Intermediate
Blender 3D may seem for non-user quite difficult to approach, and yet there are a lot of ways to use it accuratly with measures and tree function structure. This tutorial will design a precise screw. It is a near way of approaching technical design. Yes, it will not be as quite easy as solidwork or others, but the aim is to be more precise with blender.
BlenderCAD precise drawing parametric accurate

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

Sourbh
in Design & CAD
8 1 Beginner
Let Start With Beginning..
Powermill cnc tools engineering mill mechanical power mould mold machining educational basic program sourbh

Shrinkwrap Feature in Pro/Engineer....

c0cd00a1
in Design & CAD
0 1 Beginner
Here's the tutoriall
PTC Creo Elements shrinkwrap

Tutorial - Modeling Drill bit in Creo Elements Pro aka Pro/Engineer Wildfire?

Sudhir Gill
in Design & CAD
1 1 Beginner
Here is the tutorial.
PTC Creo Elements modeling bit drill wildfire creo elements engineer pro tutorial creating

Blender

vijay
in Modeling
0 1 Beginner
Using solidwork software in made a 3D modeling and finally texture and animated in blender software
BlenderCAD filtration vacuum design blender

S-shaped battery cooling geometry in ANSYS

Amit Kumar Yadav
in Modeling
0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.
SpaceClaim automation simulation performance cooling system battery heat transfer fluid dynamics

Hydrus 3d tutorial by https://virses.com

architectural renderings India
in Modeling
0 1 Intermediate
A series of a few video tutorials on this page serves as an introduction to more sophisticated modeling of 3D geometries of general shapes. Three basic techniques for creating objects are illustrated here. Generation of an unstructured 3D finite element mesh is also demonstrated, including the use of local refinement and mesh-stretching. Note that the video tutorials given below are related to the domain type “3D-General” and that simpler computational domains (i.e., 3D-Simple and 3D-Layered) are created differently – see Overview of Domain Types in HYDRUS. https://virses.com Step 1 - Creating Solids in the Dialog for Copying and Transforming Objects This video shows how to create a Solid (volume) using a dialogue window that copies objects and carries out their geometric transformations. Copied objects can be automatically linked, thus creating new Curves, Surfaces, and Solids. This method is especially useful when one needs to create multiple copies of an object in a single step. Procedure: Select Surfaces (including their Points and Curves), from which you want to create Solids (objects). In the dialog window for manipulating geometric objects, select the type of transformation and the number of copies. Select the option for the automatic linking of copied objects and generate Solids. Note: In order to correctly create Solids, it is necessarily to select not only Surfaces, but also their Boundary Curves and Points. Curves will not be generated for Points that are not selected, since linking of Objects is performed only for those selected. Step 2 - Creating Solids graphically by extruding selected Surfaces This tutorial demonstrates the definition of a Solid by extruding a selected Surface. One can generate multiple Solids at the same time if, before running the graphical tool, one selects multiple Surfaces. Direction of extrusion and an exact thickness of a Solid can be specified in the edit boxes. At the same time, one can assign a material number to a Solid, if one uses the option of defining properties on geometric objects. The Solid created this way has boundary surfaces of the type Planar and Quad. If you want to define a Solid bounded by other Surfaces (B-Spline, Rotary, Pipe, TIN, ...), use the procedure described in the following tutorial or in Tutorial 5.03. https://virses.com Step 3 - Creating Solids by Boundary Surfaces This video tutorial serves as an example of the most general way to define 3D domains; namely using the Boundary Surfaces. Boundary Surfaces may be of different types - Planar and/or Curved, and may also be Components (parts of Surfaces) established by cross-sections of their parent Surfaces. In more complex cases (for example, when one Solid is surrounded by other Solids), it is recommended to divide the Domain into Geo Sections (or to use a function “Sections - Cut with rectangle”) and display in the View window only those Surfaces, from which you want to form a new Solid. Then you can conveniently select Surfaces using either rectangle or other forms of selection (selection using a rhomboid or a polygon, or selecting an object in the data tree of the Navigator). It is also possible to switch the View to the wire-frame view (Wire-Frame Model), thereby disclosing objects otherwise hidden behind other objects. When defining a Solid, it is checked that its boundaries are closed. The Solid may include various internal objects - openings, inner Solids, and/or Surfaces, Curves, and Points. Step 4 - Generating the FE-Mesh This video shows the generation of a FE mesh without any further optimization. An automatically selected size of finite elements is used, which is calculated so that the number of elements is in a reasonable range (on the order of tens or hundreds of thousands of elements). However, such an FE mesh need not be appropriate for calculations and it is usually necessary to modify parameters for mesh generation, so that the resulting FE mesh is suitable for a given problem. The basic parameter for generating the FE-mesh is the desired (or targeted) size of finite elements. This size is used everywhere where there is no local FE-mesh refinement specified to adjust this size. At the same time it is worth bearing in mind that FE meshes with a large number of elements (> 1,000,000) are not suitable for calculations on the PC because of a resulting large demand on computational time. Users are advised to read the Notes on Temporal and Spatial Discretization. https://virses.com Step 5 - FE-Mesh Refinements This tutorial demonstrates how to refine the FE mesh using the FE-Mesh Refinement. Mesh Refinements can be defined in Points, on Curves, Surfaces, and/or Solids. Created FE-Mesh Refinement object can then be assigned to one or more geometric objects. In this tutorial, the FE-Mesh Refinement is assigned to four different Solids. If you later decide to refine the FE mesh (for example, to change the desired size of finite elements), you can only change the parameters of the FE-Mesh Refinement object and the sizes of the finite elements will be adjusted in all four elements. Even here, however, the principles mentioned in the previous tutorial need to be considered - the FE mesh needs to be fine enough, so that the numerical solution converges, and not too fine, so that calculations do not take too long. Step 6 - FE-Mesh Stretching In this video we demonstrate the option FE-Mesh Stretching. This option can often help us in creating a FE mesh that reflects direction of pressure head (or concentration) gradients and is thus appropriate for calculations. Note that water fluxes in the vadose zone have predominantly vertical direction. Refinement (shrinkage) of finite elements in one direction (usually vertical direction) gives us a sufficiently fine FE mesh in the direction of high gradients and high fluxes. On the other hand, corresponding stretching of finite elements in the other direction provides us with courser discretization in the direction of minimum fluxes and small gradients, thus reducing the overall number of finite elements and subsequently speeding up numerical calculations. https://virses.com
BlenderCAD animations affordable outsourcing india renderings architectural 3d

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

How to create a CAM profile using relations in pro-Engineer/Creo-parametric?

c0cd00a1
in Design & CAD
1 1 Beginner
Here's the answer... p.s.In the step-14 I 'd have changed the dimension to 50mm...so please implement it in the 6-th step also...instead of 40mm ,change it to 50mm
PTC Creo Elements proengineer creo parametric 1-0

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

Tutorial on Modeling Pipe Joint in Creo Elements/Pro aka Pro/Engineer Wildfire?

Sudhir Gill
in Design & CAD
0 1 Beginner
Here is the tutorial.
PTC Creo Elements modeling pipe joint tutorial

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
3 1 Beginner
Here is the tutorial.
PTC Creo Elements solid surface wildfire creo elements text engineer pro tutorial curved bend extrude emboss flatten quilt

Sweep with multiple sections

Sumit Luthra
in Design & CAD
3 0 Beginner
For this we have to use swept blend command.
PTC Creo Elements section sweep pro multiple blend

Tutorial - Modeling rope in Creo Elements aka Pro/E

Sudhir Gill
in Design & CAD
1 0 Beginner
For making simple bended rope we have to follow these steps. 1 Make 4 cylinderical extrusions. 2 Twist them. 3 Bend them.
PTC Creo Elements modeling wildfire creo elements engineer pro tutorial
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.