Tutorials

  • Design & CAD ×
  • Theory ×
  • Snagit ×
  • BricsCAD ×
  • Lagoa ×
  • Pro/Engineer Wildfire ×
  • SpaceClaim ×
  • 3D Manufacturing Format ×

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

Helical pattern of holes in pro-e.

rakesh
in Design & CAD
1 1 Beginner
I hope, this will be useful for you
Pro/Engineer Wildfire

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
1 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

How to make twisted bar

Oleksandr
in Modeling
1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.
SpaceClaim bar twisted

Top down assembly with skeleton model in pro engineer.

e19
in Design & CAD
1 0 Beginner
following general steps to make top down assembly from skeleton model
Pro/Engineer Wildfire top engineer pro down

how to roll back the model in proe5, is there any way like solid works

Charoenpon555
in Design & CAD
1 0 Beginner
See pic.
Pro/Engineer Wildfire

CURSO GRATUITO SOLIDWORKS

isai lopez
in Modeling
1 0 Beginner
CURSO COMPLETAMENTE GRATIS SOBRE EL MANEJO DE SOLIDWORKS
3D Manufacturing Format https-www-youtube-com-watch-v-3nt9ypxe49s

How to Copy-Paste parameters from one part to another in Pro-E?

martin Cronje
in Design & CAD
1 0 Intermediate
It doesn't the parameters if there is a parameter which has a restriction. I've deselected those parameters and copy and paste the rest into the part. You will have to create the restricted parameters yourself.
Pro/Engineer Wildfire values paste parameters copy proe pro pro-e

How to optimize time during sketching in Pro-E/Creo ??

Saurabh Kumar
in Design & CAD
1 0 Beginner
Well I've started with sketching tips in pro-e/creo, which often come handy when I use pro-e/creo elements.Then I'll move on to some feature base tips.So lets not waste time and get started.Its easy and will take minimal time...
Pro/Engineer Wildfire sketch creo proe tipsntricks

how to do wire rope in pro e

Tushar Wandhare
in Design & CAD
1 1 Intermediate
wire rope can be design by using WRAP command.
Pro/Engineer Wildfire

Tutorial: How to save time in sketcher mode in Pro-E/Creo Elements

Saurabh Kumar
in Design & CAD
1 0 Beginner
References is used in sketcher mode only.It lets you use existing geometry in a better way.By adding references , sometimes you can resolve the unresolved sketches also. Any suggestions and questions are welcome...
Pro/Engineer Wildfire sketch pro-e tipsntricks

Tutorial - How to make dodecahedron pot

engineer
in Design & CAD
1 0 Beginner
That's what I did.
Pro/Engineer Wildfire solid dodecahedron platonic howto

Tutorial on Four bar mechanism animation in creo or pro e wildfire.

prabhakaran
in Design & CAD
1 0 Beginner
continue to create the mechanism
Pro/Engineer Wildfire mechanism bar animation linkage four

Component Interface in Assembly mode of proEngineer

c0cd00a1
in Design & CAD
0 0 Beginner
Component Interface is mainly used in order to cut-short the time involved in assembling components which are easy to assemble..for example a bolt and a nut to be assembled to a pulley...they all have same constraints..2 -Axes,Surfaces..So It 'd be boring and sometimes time consuming if we keep on specifying the constraints each and every time in a large assembly..for ex. An Engine..,So in order to make it much faster,We make use of the component interface...
Pro/Engineer Wildfire assembly proe
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.