Tutorials

  • Alibre Design ×
  • Onshape ×
  • PTC Creo Elements ×

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

Onshape Tutorial Exersice

Çağın Gergin @chagocad
in Modeling
11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29
Onshape onshape modellig loft free extrude

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Creating a Worm Wheel in Creo Parametric 1.0

c0cd00a1
in Design & CAD
5 0 Beginner
Here's the answer for it..
PTC Creo Elements creo parametric 1-0

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

How to change from inch im mm in creo 2.0?

anhquoc38
in Design & CAD
5 0 Beginner
tutorial: see the img.
PTC Creo Elements inch cad creo unit change millimeter

volleyball in Onshape

Jens Nielsen
in Modeling
4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.
Onshape volleyball

Sweep with multiple sections

Sumit Luthra
in Design & CAD
3 0 Beginner
For this we have to use swept blend command.
PTC Creo Elements section sweep pro multiple blend

Proper Method to Produce Lobster-back Duct Bends

lawrie
in Drafting
3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing
Alibre Design

Onshape for Absolute Beginners

Engineering Juice
in Modeling
3 0 Beginner
https://youtu.be/2utLjjkXpIg
Onshape onshape beginner onshape tutorial onshape beginners onshape cad tutorial onshape modeling tutorial onshape for beginners onshape tutorial for beginners onshape tutorial

Tutorial - how to make a spiral sphere

Flaviano Crespi
in Design & CAD
3 0 Beginner
This tutorial was compiled with Creo Elements / Direct Express to implement a model similar to my file: http://grabcad.com/library/spiral-sphere You can download a free fully functional copy of Creo from PTC site: http://www.ptc.com/products/creo-elements-direct/modeling-express/ Creo is completely "history-free" and uses the so-called "explicit modeling".
PTC Creo Elements

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

Sudhir Gill
in Design & CAD
3 1 Beginner
Here is the tutorial.
PTC Creo Elements solid surface wildfire creo elements text engineer pro tutorial curved bend extrude emboss flatten quilt

How To Create Chess Queen

Sneha Bhamidipaty
in Modeling
3 1 Beginner
Chess Queen on OnShape
Onshape

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

Sudhir Gill
in Design & CAD
2 0 Beginner
Here is the tutorial.
PTC Creo Elements modeling surface wildfire flower engineer pro tutorial method
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.