Tutorials

  • Assemblies ×
  • AutoCAD ×
  • Fusion 360 ×
  • NX Unigraphics ×
  • GrabCAD Community ×
  • Other ×

NX 11:Creating Assembly

Anand Panchal
in Assemblies
14 2 Beginner
A tutorial on Sub assembly and showing arrangements of hydraulic cylinder-piston assembly.
NX Unigraphics sub-assembly cylinder hydraulic arrangements assembly unigraphics nx

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

Engineering Juice
in Assemblies
10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.
Fusion 360 robotics tutorial 360 fusion

Scooby_doo car

Capragiu Mihai
in Assemblies
9 0 Beginner
Estaffette
AutoCAD

DRONE ASSEMBLY DESIGN in SIEMENS NX

MANIKANTHA P
in Assemblies
8 0 Beginner
Drone assembly design using Siemens NX, An unmanned aerial vehicle (UAV) (or uncrewed aerial vehicle,[2] commonly known as a drone) is an aircraft without a human pilot on board. UAVs are a component of an unmanned aircraft system (UAS); which include a UAV, a ground-based controller, and a system of communications between the two.[3] The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator or autonomously by onboard computers[4] referred to as an autopilot.
NX Unigraphics assembly nx unigraphics drone

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

Engineering Juice
in Assemblies
6 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)
Fusion 360 robot robotics lesson tutorial 360 fusion

How to assemble separate components of a 3D model in virtual reality using SimLab Composer?

SimLab Composer
in Assemblies
5 0 Beginner
Description: In this tutorial we will teach you how assemble separate parts of a three-dimensional model using the virtual reality VR docking tool of SimLab composer. To do so, we are using a 3D model of a table, with two versions: version A, assembled model, and version B, disassembled components (which are in this tutorial the table parts).
Other reality virtual vr disassembled assembled composer simlab

Boat Hull Design-using Autodesk Fusion 360

leo zeng
in Assemblies
5 0 Beginner
How to design a boat hull using loft in fusion 360.
Fusion 360 360 fusion cad hull boat

How to Package Electronic Components in Fusion 360: Tutorial

Engineering Juice
in Assemblies
5 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360
Fusion 360 tutorial 360 fusion

Fusion 360 | X-BOX Series X Controller | Part 11

CAD Pond
in Assemblies
4 1 Beginner
In this video, we assemble the different components of the game controller. -------------------- Happy Modeling
Fusion 360 game controller xbox cam cad

Four Stroke Engine Assembly - Working

Manas Shrivastava
in Assemblies
4 0 Beginner
The tutorial comprises of steps to make a four-stroke Internal Combustion Engine using basic tools in Fusion 360. The viewer will have to pause the video at most of the steps, as this is a fast-paced overview to keep the tutorial short. Thanks! Link to video: https://drive.google.com/file/d/13n3k7WpurUmLhDXHRZ5agKdFSUSOdl5x/view?usp=sharing
Fusion 360 slidercrank bike car automotive mechanicalengineering design mechanism engine

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

Engineering Juice
in Assemblies
3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.
Fusion 360 printing print 3d screw gears motor dc design tutorial 360 fusion

Learn how to make slider joint between two components~ using Autodesk Fusion 360.

Harsh Priyanshu
in Assemblies
3 0 Beginner
Learn how to make a slider joint between two components using Autodesk Fusion 360. I hope you enjoyed the designing process and the model. if you enjoyed the process and model, then hit subscribe and like the video. and don't forget to comment on your views on this model and process.
Fusion 360 autodesk 360 fusion

Assembly shock absorber

Caraus Vitalie
in Assemblies
2 0 Beginner
Assembly shock absorber with all component
NX Unigraphics https-www-youtube-com-watch-v-n8kxauriluk-t-1010s

FUSION360 Configurations Tutorial for parts insertion into design

Riley Entropy
in Assemblies
2 0 Beginner
Turn a model into a configurable model so when you go to insert the part into a design, it will give you a menu where you can select the specific plug from a single file without having 10 individual plugs floating around in a folder :) Things I use this method for: Batteries of varying mAh, screws and standoffs of varying length, plugs, sockets, IC's, etc.
Fusion 360 component insert parts configuration configurable

How to Make a DC Motor & Sprocket Assembly: Fusion 360 Robotics Tutorial for Beginners (Robot Part 3)

Engineering Juice
in Assemblies
2 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time. Buy this chain for projects: https://amzn.to/3f2FZEl
Fusion 360 project robotics assemblies beginner tutorial 360 fusion
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.