Tutorials

  • Assemblies ×
  • Translations ×
  • Measurement / Inspection ×
  • Delmia ×
  • KeyShot ×
  • Powermill ×
  • Pro/Engineer Wildfire ×
  • Rhino ×

How to use Welding

Vladimir Palffy
in Assemblies
4 0 Beginner
In the ProE and Creo is possible to create different types of Welds. System automatically calculate with used materials and Weld process. This information is possible to show in the Weld symbol and drawings.
Pro/Engineer Wildfire welding

Export Motion Study from SOLIDWORKS with Keyshot Plug-in

Ibrahim Omer
in Assemblies
2 0 Intermediate
After a lot of request from my subscribers and friends, finally I have decided to make tutorials with voice over. . I hope you like it. In this tutorial, we'll learn how to transfer a motion study of SOLIDWORKS with Keyshot add-in. This tutorial will help many engineers, designers to create beautiful rendered animations. First of all, I have shown the assembly of adjustable wrench which I have already done in SOLIDWORKS. This assembly consists of four parts. 1) Fixed Jaw 2) Movable Jaw 3) Worm Screw 4) Pin I have attached their files for practice. Then we move towards motion study section. Here, I have shown animation of adjustable wrench in SOLIDWORKS. We use Keyshot plug-in and we have linked our file to Keyshot. It will pick this animation. Just go to SOLIDWORKS motion study, go to Keyshot add-in, a window will pop up, click yes to export entire animation. After exporting your animation in Keyshot, adjust the wrench assembly. Do some basic settings and go to animation tab. We have selected 12 FPS and 128 samples per frame. Click render and save the animation. Kindly use play pause technique for practice. I have attached files in the description for practice. Feel free to ask your queries in comment section. I will try to answer each and every question Insha Allah. Keep practicing as practice makes a man perfect. #solidworkskeyshot #plugin #cadable Assembly Files: https://grabcad.com/library/adjustabl... Kindly Subscribe our Channel for more Videos and Projects in Solidworks. Please Like and Share Our Videos. Thanks for Watching. Follow our Channel: https://www.youtube.com/c/CADable
KeyShot designer product cadable modeling 3d wrench adjustable assemblies animation rendered study motion export keyshot solidworks

Keyshot - Learn the Basics - Panton Chair case study

3D Comparison
in Translations
2 1 Beginner
KeyShot is a stand-alone, real-time ray tracing and global illumination program used to create 3D renderings, animations and interactive visuals. It is a popular choice for designers, engineers, and marketing professionals because it is easy to use and produces photorealistic results quickly. The reference image can be found at: https://www.vitra.com/en-un/product/panton-chair The 3D Model and the render can be downloaded at: https://grabcad.com/library/panton-chair-82
KeyShot chair panton design product industrial colors easy rendering

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

"Failsafe" ESPHome Fireplace Controller

John McManigle
in Assemblies
0 0 Intermediate
When asked what smart switch to use to control their gas fireplace, you see a lot of replies "do you want to be one software bug away from your fireplace turning on?" Granted, modern gas fireplaces have safeties in place to prevent un-lit open valves, runaway heating, etc., but some people would still rather have a hardware switch standing between them and fire. This project aims to be the best of both worlds: by running 5v power to the low-voltage switch box holding my fireplace wall switch (in my case, this involved pulling 5-conductor thermostat wire using the existing 2-conductor wire), you can power an ESP board running ESPHome. By running the actual thermostat switch signal through both a DPST and a (ESPHome-controlled) 3v relay, we can be sure that the fireplace is only "active" if the manual switch is turned on.
Rhino smart home rhino esphome home assistant fireplace

Door Hinge Animation |Exploded View Animation |SOLIDWORKS Hinge Animation | Keyshot Hinge Animation|

Ibrahim Omer
in Translations
0 1 Beginner
Door Hinge modeled and assembled in SOLIDWORKS and its animation rendered in Solidworks 2020 and in Keyshot 9. This is simple animation output and not the tutorial. I have attached all files for practice. https://grabcad.com/library/sheet-metal-hinge-3 Kindly Subscribe our Channel for more Videos and Projects in SOLIDWORKS, Keyshot, AutoCAD, Blender etc. We also offer freelancing services. Kindly Like and Share Our Videos. Thanks for Watching. Follow our Channel: https://www.youtube.com/c/CADable​​​ #doorhingeanimation #hingedoorsolidworks #cadable #keyshotdoorhinge
KeyShot view exploded cadable animation keyshot hinge door solidworks

assemblies

Lucius R.B
in Assemblies
0 0 Beginner
framing assemble in rhino
Rhino
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.