Tutorials

  • Modeling ×
  • Assemblies ×
  • Dimensioning / Tolerancing ×
  • NC Machining ×
  • Autodesk 123D ×
  • BricsCAD ×
  • Delmia ×
  • Femap ×
  • SpaceClaim ×
  • Rendering ×
  • GrabCAD Community ×

How to model a simplified toilet in BricsCAD

2e2bc4ca
in Modeling
3 1 Intermediate
Key commands covered: DMSIMPLIFY Extrude - taper DMTHICKEN ISOLATEOBJECTS HIDEOBJECTS UNISOLATEOBJECTS SolidEdit - Body - seParate Components library (BricsCAD Mechanical only)
BricsCAD potty wc bathroom plumbing bricscad toilet

BUCKLING IN FEMAP FOR BEGINNER

Hanen Bdioui
in Modeling
2 0 Beginner
LESSON 1 : BUCKLING IN FEMAP FOR BEGINNER
Femap buckling design solidworks femap

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

ADOBE PHOTOSHOP TUTORIAL - How to prepare decals for Rendering

ioan skurka
in Modeling
2 2 Beginner
ADOBE PHOTOSHOP TUTORIAL How to prepare decals for Rendering
Rendering photoshop decals rendering

Old Fashioned style staircase

2e2bc4ca
in Modeling
1 0 Intermediate
Learn BricsCAD with practical examples. This week, learn how to use advanced modeling techniques to make a set of stairs in CAD. Commands covered: DIV(DIVIDE) AR(ARRAY)/Path AR(ARRAY)/Polar SWEEP REV(REVOLVE) EXT(EXTRUDE)/Both sides 3P(3DPOLY) IAT(IMAGEATTACH)
BricsCAD divide sweep revolve array techniques modeling staircase stairs

Use Ansys SpaceClaim to Model Twisted Pair Wire

Fineman
in Modeling
2 0 Intermediate
Before I know how to do it, I cannot get any useful tips while I googling, it seems very hard. But it is very easy now. This tutorial will help you to model a simple twisted pair wire, for detailed twisted pair wire you can explore it by yourself. A model which modeled by this tutorial is in this linked page: https://grabcad.com/library/w-1930-1575-twisted-pair-wire-1.
SpaceClaim wire pair twisted spaceclaim

How to make twisted bar

Oleksandr
in Modeling
1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.
SpaceClaim bar twisted

How to create Keyshot Render in 6 Simple Step

ismail_akar
in Modeling
1 0 Beginner
How to create Keyshot Render in 6 Simple Step In this video you can learn how to make Keyshot Render on basic level. https://www.3dcatia.com
Rendering model 3d rendering render keyshot

S-shaped battery cooling geometry in ANSYS

Amit Kumar Yadav
in Modeling
0 0 Intermediate
Creating an S-shaped cooling geometry in ANSYS or any other simulation software requires a good understanding of fluid dynamics, heat transfer, and simulation tools. It may also involve several iterations to achieve the desired battery system cooling performance.
SpaceClaim automation simulation performance cooling system battery heat transfer fluid dynamics

How To Design A Helical Spring using ANSYS 2022

Mirazul Islam Badhon
in Modeling
0 0 Beginner
How To Design A Helical Spring using ANSYS
SpaceClaim solidworks ansys spring design helical compression spring helical spring spring
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.