Tutorials

  • Design & CAD ×
  • Translations ×
  • Measurement / Inspection ×
  • Other ×
  • NX Unigraphics ×
  • SpaceClaim ×
  • GrabCAD Print ×

How to create spur gear in Siemens NX?

Hegedűs György
in Modeling
37 5 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4 UPDATE: At ~ 2:40 leave the Limit options at default (At Point). See the errata video for the reason: https://youtu.be/PUpdlyQcaOs
NX Unigraphics gear spur

Siemens NX 12 Surfacing: Step by Step Tutorial

Shuvam Kumar
in Modeling
23 4 Intermediate
Siemens NX 12 Surfacing Tutorial: Step by Step Tutorial Some Commands 1.Studio Surface 2.Bounded Plane 3.Sew 4.Shell 5.Combined Curve Watch All Video For Full Tutorial Video 1.Siemens NX 12 Surfacing: Step by Step Tutorial Part-1 https://youtu.be/-5c1hRNXSco 2.Siemens NX 12 Surfacing: Step by Step Tutorial Part-2 https://youtu.be/RgXmQEguql0 3.Siemens NX 12 Surfacing: Step by Step Tutorial Part-3 https://youtu.be/3Ym4L3O2e94 4.Siemens NX 12 Surfacing: Step by Step Tutorial Part-4 https://youtu.be/GlIwPYwUpnU 5.Siemens NX 12 Surfacing: Step by Step Tutorial Part-5 https://youtu.be/5RWytrc0PrU
NX Unigraphics tutorial modeling surface nc surfacing 12 nx siemens

NX 11: Interpart Expression

Anand Panchal
in Dimensioning / Tolerancing
5 2 Intermediate
Interpart Expression: To create or edit a link to an expression in another part. To apply tolerance and link two dimensions in assembly.
NX Unigraphics dimensioning aseembly inter expression interpart tolerance unigraphics nx

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

How to create deformable seals in Siemens NX?

Hegedűs György
in Modeling
3 0 Intermediate
In this tutorial the modeling of deformable seal will be shown. To see how its work here you can find a video presentation: https://www.youtube.com/watch?v=leGb1BiB--0
NX Unigraphics seal deformable

How to make the sketch plane normal to the view in NX when sketching

Sebi
in Design & CAD
0 0 Intermediate
Hi, There are two ways (or more ?) to obtain the "Sketch View". Anyway the simple method is the native NX shortcut Shift + F8. The menu tools are the following:
NX Unigraphics

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

Mold Wizard Siemens NX CAD Tutorial

Shuvam Kumar
in Modeling
14 0 Intermediate
How To Use Mold Wizard in Siemens NX CAD
NX Unigraphics cad extraction cavity core tutorial 12 wizard nx design mold

How to make datum plane in assembly?

Jane Jeong
in Design & CAD
0 0 Intermediate
you can make datum plane,axis,line by using point in assembly.
NX Unigraphics nx assembly datum

Tutorial - How to make a flexible hose in siemens nx

Wolfgang Walden
in Design & CAD
4 3 Intermediate
Another user wish - a flexible tube. I used a circular section surface, some expressions and lawcurves.
NX Unigraphics

Mold Design in NX 10

gcom
in Design & CAD
14 3 Intermediate
Mold Design in NX 10. Without Mold Wizard and fully parametric.
NX Unigraphics tutorial 10 nx

How to make holes on a curved surface in NX that patterns around the curve

Bob Heijningen
in Design & CAD
3 0 Intermediate
i used 2 workplanes and 1 extrusion
NX Unigraphics holes nx surface curved

Tutorials: Video course in NX Realize Shape

Magnus Skogsfjord
in Design & CAD
7 3 Intermediate
5 Tutorials in NX Realize Shape
NX Unigraphics realize freeform industrial design modeling shape

how to create the raster image and how to insert the raster image in nx8

gcom
in Design & CAD
1 1 Intermediate
how to insert the raster image in nx?
NX Unigraphics

Mountain Bike Design

MANIKANTHA P
in Assemblies
30 10 Intermediate
Mountain Bike Design part 01 using unigraphics
NX Unigraphics assembly unigraphics bike mountain mtb
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.