Tutorials

  • Assemblies ×
  • Simulation & CAE ×
  • Process Simulation ×
  • AutoCAD ×
  • BricsCAD ×
  • Bentley MicroStation ×
  • FreeCAD ×
  • Fusion 360 ×
  • IronCAD ×
  • Other ×

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

Engineering Juice
in Assemblies
10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.
Fusion 360 robotics tutorial 360 fusion

Pulley Tensioner 2, Fusion 360, animation

Auday
in Assemblies
9 0 Expert
another Pulley Tensioner disassembly using Fusion 360 Animation
Fusion 360

Scooby_doo car

Capragiu Mihai
in Assemblies
9 0 Beginner
Estaffette
AutoCAD

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

Engineering Juice
in Assemblies
6 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)
Fusion 360 robot robotics lesson tutorial 360 fusion

Static Simulation in Fusion 360! Bicycle Crank Arm Tutorial

Engineering Juice
in Simulation & CAE
5 0 Beginner
0:25 Simulation Start 0:56 Simplify 1:31 Materials 2:02 Constraints 2:58 DOF View 3:23 Loads 4:52 Solve In this tutorial, we will create a static simulation for our bicycle crank arm in Autodesk Fusion 360. We will simplify our assembly, to remove the fittings, then add a material, constraints and a load to the end of the arm. When we solve our assembly, we will end up with the amount of deformation. We will then run the simulation again once we core out the inside of our crank arm to see the difference in the analysis.
Fusion 360 static simulation tutorial lesson 360 fusion

A2plus in FreeCAD

siddharth sharma
in Assemblies
5 0 Beginner
n this Tutorial you can learn A2 plus Point on Point- Constraint Another constraints I will discuss in Next Tutorial Here Site For A2 Plus addons https://github.com/FreeCAD/FreeCAD-ad... DescriptionFreeCAD is a free and open-source general-purpose parametric 3D computer-aided design modeler and a building information modeling software with finite element method support. Downloads FreeCAD software from this https://www.freecadweb.org/downloads.php
FreeCAD how animation install constraints learn constraint freecad a2plus

How to assemble separate components of a 3D model in virtual reality using SimLab Composer?

SimLab Composer
in Assemblies
5 0 Beginner
Description: In this tutorial we will teach you how assemble separate parts of a three-dimensional model using the virtual reality VR docking tool of SimLab composer. To do so, we are using a 3D model of a table, with two versions: version A, assembled model, and version B, disassembled components (which are in this tutorial the table parts).
Other reality virtual vr disassembled assembled composer simlab

Boat Hull Design-using Autodesk Fusion 360

leo zeng
in Assemblies
5 0 Beginner
How to design a boat hull using loft in fusion 360.
Fusion 360 360 fusion cad hull boat

How to Package Electronic Components in Fusion 360: Tutorial

Engineering Juice
in Assemblies
5 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360
Fusion 360 tutorial 360 fusion

Fusion 360 | X-BOX Series X Controller | Part 11

CAD Pond
in Assemblies
4 1 Beginner
In this video, we assemble the different components of the game controller. -------------------- Happy Modeling
Fusion 360 game controller xbox cam cad

Four Stroke Engine Assembly - Working

Manas Shrivastava
in Assemblies
4 0 Beginner
The tutorial comprises of steps to make a four-stroke Internal Combustion Engine using basic tools in Fusion 360. The viewer will have to pause the video at most of the steps, as this is a fast-paced overview to keep the tutorial short. Thanks! Link to video: https://drive.google.com/file/d/13n3k7WpurUmLhDXHRZ5agKdFSUSOdl5x/view?usp=sharing
Fusion 360 slidercrank bike car automotive mechanicalengineering design mechanism engine

Static Stress Simulation: I-Beam Bending in Fusion 360! Tutorial

Engineering Juice
in Simulation & CAE
3 0 Beginner
How to do a static stress simulation on an I-beam in Fusion.
Fusion 360 beginner 2019 sketch modeling tutorial 360 fusion fusionsimulation

F1 Gear Shifter Assembly - Tutorial

Manas Shrivastava
in Assemblies
3 0 Intermediate
Video Tutorial on how to make a working assembly of the gear shifting mechanism in an F1 car. The dimensions are not up to scale, and the viewer will have to pause the video at most of the steps, as this is a fast-paced overview to keep the tutorial short. Thanks! Link: https://drive.google.com/file/d/10TO1Ocy4QwGQnuqr01dPao8N8IrhSKA-/view?usp=sharing
Fusion 360 gears machine design mechanicalengineering mechanism formula1 cars automobile

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

Engineering Juice
in Assemblies
3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.
Fusion 360 printing print 3d screw gears motor dc design tutorial 360 fusion

Assembly of the propulsion system

VIVEK AKASH
in Assemblies
3 0 Intermediate
Here we will be assembling the drone motor and propeller making a complete propulsion system. Motor: EMAX MT3515 650KV Propeller: APC 13*4
Fusion 360 imaging settings screen environment rendering assembly
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.