Tutorials

  • Drafting ×
  • Translations ×
  • AutoCAD Electrical ×
  • Autodesk Inventor ×
  • Autodesk Maya ×
  • Fusion 360 ×
  • JT ×
  • Rendering ×
  • Text file ×

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Project Manager

3D Machine and Technologies by Ferhat
in Drafting
13 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com
Autodesk Inventor

Saving your Fusion 360 design in your local storage

Riolito Paildelan - GCPH
in Translations
11 0 Intermediate
Hi @https://grabcad.com/cyrhuz.sortijas.bocar-1, You've mentioned earlier that your license is about to expire. The good news is it will prompt you options of renewing your educational license. I figured that you asked about these because you're worried that your precious thesis file that you put in so much effort will be lost. Luckily all design files from f360 is saved in the cloud (internet connection required). So there's pretty much nothing to worry about. Anyhow, here's a quick tutorial on how to save your f360 design file on your local storage as a safety precaution.
Fusion 360 storage local cloud 360 fusion

diverse shape translation to JT or STP

juergen grewe
in Translations
9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.
JT jt2go tcvis edge solid paint 3d mashlab pconplanner automapki sketchup

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

Suryo Puji Buwono
in Drafting
3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor
Autodesk Inventor teknik gambar e-tiket

Isometric view drawing with Dimensions in fusion 360

vikram ahuja
in Drafting
2 0 Beginner
Hi Guys, In this video, I am going to tell you that how can you make a Isometric view drawing with Dimensions in fusion 360. I have taught you how to make Isometric view drawing with Dimensions, which will make you understand in simple way. If you want to learn Fusion 360 software and If you want more tutorials, Then you can also subscribe my Youtube Channel, Whose link I have given you below. My Youtube Channel Name is: Ahuja Technical Hant https://www.youtube.com/channel/UClh7lX8d70gIwoA7z5Tt2Yg https://youtu.be/tEDOTYTzFgs
Fusion 360 draftingwithdimentions cadmodeling fusion360 drafting

Create blue print by Autodesk Inventor

Ebrahim Zokaee
in Drafting
2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.
Autodesk Inventor inventor drafting blue print

onvert 3D model into 2D Fully Dimesioned Drawing using Drawing Workspace of Autodesk Fusion 360.

Harsh Priyanshu
in Drafting
2 0 Beginner
Learn how to Convert 3D model into 2D Fully Dimesioned Drawing using using Drawing Workspace Autodesk Fusion 360 . this video is totally meant for beginners so i overlooked few tools and things which are not necessary for now:) I hope you enjoyed the designing process and the model. if you enjoyed the process and model, then hit subscribe and like the video. and don't forget to comment your views on this model and process.
Fusion 360 autodesk drawing 360 fusion

Sketchup to Inventor-How to export SketchUp to Inventor-convert Google sketchup to Autodesk Inventor

Infinity Projetos Brasil
in Translations
1 1 Beginner
see the video below
Autodesk Inventor autodesk inventor sketchup import export

Convertir Archivo de Sketchup a Inventor exportación e importe Español

Infinity Projetos Brasil
in Translations
1 0 Beginner
mira el video a continuación
Autodesk Inventor sketchup inventor exportacion importar

Ritningsläsning - Måttsättning av en Kub

Jakob Andersson
in Drafting
1 0 Beginner
Lär dig mer om ritningsläsning i Fusion 360.
Fusion 360

Learning Autodesk Fusion 360 in Arabic - 15

Auday
in Drafting
1 0 Beginner
https://youtu.be/pe5l0tIGzec انتاج الرسم الهندسي - المخططات - من الاشكال المجسمة Produce the final engineering drawing from Objects
Fusion 360

Using Sketch in Inventor Assembly Parts.

Harm chang woo
in Drafting
1 0 Beginner
1. Create a sketch from the assembly parts. 2. Build new parts by referring to sketches.
Autodesk Inventor

Como exportar do Sketchup para o Inventor Do Google Sketchup para o Autodesk Inventor

Infinity Projetos Brasil
in Translations
1 0 Beginner
veja o vídeo abaixo
Autodesk Inventor inventor sketchup importar exportar

How to import 3D meshes with appearance properties in Fusion 360

3D Comparison
in Translations
1 0 Beginner
Case study regarding various models imported with visual appearances in Fusion 360
Fusion 360 files obj 3d meshes properties apperance texture
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.