Tutorials

  • Modeling ×
  • Translations ×
  • NX Unigraphics ×
  • Parasolid ×
  • PTC Creo Parametric ×

How to create spur gear in Siemens NX?

Hegedűs György
in Modeling
37 5 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4 UPDATE: At ~ 2:40 leave the Limit options at default (At Point). See the errata video for the reason: https://youtu.be/PUpdlyQcaOs
NX Unigraphics gear spur

Complete MTB design in NX

MANIKANTHA P
in Modeling
29 3 Beginner
complete mountain bike design
NX Unigraphics mountain bike mtb

Simple Spring in PTC CREO PARAMETRIC 3.0

Yash Lad
in Modeling
25 0 Expert
simple spring creation by using helical sweep function.
PTC Creo Parametric solid part plane pitch circle axis sketch spring sweep helical parametric creo ptc

Siemens NX 12 Surfacing: Step by Step Tutorial

Shuvam Kumar
in Modeling
23 4 Intermediate
Siemens NX 12 Surfacing Tutorial: Step by Step Tutorial Some Commands 1.Studio Surface 2.Bounded Plane 3.Sew 4.Shell 5.Combined Curve Watch All Video For Full Tutorial Video 1.Siemens NX 12 Surfacing: Step by Step Tutorial Part-1 https://youtu.be/-5c1hRNXSco 2.Siemens NX 12 Surfacing: Step by Step Tutorial Part-2 https://youtu.be/RgXmQEguql0 3.Siemens NX 12 Surfacing: Step by Step Tutorial Part-3 https://youtu.be/3Ym4L3O2e94 4.Siemens NX 12 Surfacing: Step by Step Tutorial Part-4 https://youtu.be/GlIwPYwUpnU 5.Siemens NX 12 Surfacing: Step by Step Tutorial Part-5 https://youtu.be/5RWytrc0PrU
NX Unigraphics tutorial modeling surface nc surfacing 12 nx siemens

Tutorial : How to model involute gear in Creo 3.0

Milan Ilić
in Modeling
18 3 Beginner
How to model involute (evolvent) gear in Creo 3.0
PTC Creo Parametric model engineer pro parametric creo tutorial evolvent involute gear

Using Advanced Blend Option in Creo Parametric

jehan kothari
in Modeling
17 2 Intermediate
The video shows complete 2d to 3d Modeling as well as advanced use of loft option
PTC Creo Parametric tutorial advanced tangent blend parametric creo

Car design in NX

MANIKANTHA P
in Modeling
16 0 Beginner
Car design
NX Unigraphics automobile design car

Create Basketball Using CREO 3.0

Yash Lad
in Modeling
14 4 Expert
Software: PTC CREO PARAMETRIC 3.0
PTC Creo Parametric tutorial hobby fun just sports toys basketball parametric creo ptc

Mold Wizard Siemens NX CAD Tutorial

Shuvam Kumar
in Modeling
14 0 Intermediate
How To Use Mold Wizard in Siemens NX CAD
NX Unigraphics cad extraction cavity core tutorial 12 wizard nx design mold

How to create a aircraft fuselage

Frits Westers
in Modeling
13 0 Intermediate
with public available information on the web is it possible to create youre aircraft.
PTC Creo Parametric 717 design boeing aircraft

Creo Parametric 5.0 3D Modeling Tutorial

jehan kothari
in Modeling
13 0 Beginner
Creo Parametric 5.0 3d Modeling Tutorial. In this video, I have demonstrated a very simple 3d model. This is for those who know part modeling commands in Creo Parametric. I am not explaining "how extrude works" or similar things. You can find the drawing in below link of pinterest account.
PTC Creo Parametric blend modeling 3d beginners absolute parametric creo

Create a Simple Nut By Using PTC Creo Parametric 3.0

Yash Lad
in Modeling
13 3 Intermediate
How to create a simple nut in PTC Creo Parametric 3.0 ???
PTC Creo Parametric 1-0 2-0 3-0 sketch round hole extrude 3d nut parametric creo ptc

DRONE DESIGN in SIEMENS NX

MANIKANTHA P
in Modeling
13 0 Beginner
An unmanned aerial vehicle (UAV) (or uncrewed aerial vehicle,[2] commonly known as a drone) is an aircraft without a human pilot on board. UAVs are a component of an unmanned aircraft system (UAS); which include a UAV, a ground-based controller, and a system of communications between the two.[3] The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator or autonomously by onboard computers[4] referred to as an autopilot.
NX Unigraphics siemens nx unigraphics drone

Basic Modelling 1 (NX Unigraphics)

Bhargava Krishna Marripati
in Modeling
13 0 Beginner
Basic modelling techniques using NX Unigraphics.
NX Unigraphics modelling nx

[Tutorial Video] Basics 3d Modeling Exercise

jehan kothari
in Modeling
12 4 Beginner
In this video, I am creating a simple 3d model from the 2d drawing. But I have separately explained on how to approach a 3d model while you are facing an interview tool test. I have step by step explained my modeling process and hope you enjoy it :) Blend, Hole, Pattern etc are few commands included.
PTC Creo Parametric practice basic 2d modeling 3d parametric creo
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.