Tutorials

  • Snagit ×
  • Alibre Design ×
  • ArchiCAD ×
  • Autodesk Alias ×
  • Femap ×
  • PTC Creo Elements ×
  • GrabCAD Workbench ×

How to convert CAD files in Workbench

Sar Dar
in Design & CAD
131 49 Beginner
How to convert file formats, such as sldprt and sldasm files, to STEP, IGES, STL, Parasolid (.x_t), ACIS (.sat), JT, or VRML (.wrl)
GrabCAD Workbench sldprt vrml jt acis parasolid stl iges step

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

FREE Autodesk Alias Tutorial Day 1

Rags and Rust
in Modeling
8 0 Beginner
Education should be free... A friend, a collegue and like myself Adrian is an expert Alias modeller with extensive years of experience working with OEM design studios https://www.youtube.com/c/AdrianAutodeskAlias @a.biggins.design I will begin to upload tutorials that will teach you from the moment you open Alias for the first time, setting Alias up for efficient work flow and together build a full exterior CAS model and render it. In my opinion this is as close as you can get to seeing the work flow and theory we work towards within OEM studios day to day.
Autodesk Alias modeling modelling cas nurbs automotive car autodesk alias

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

how to model a car in autodesk alias????

kodg
in Design & CAD
5 3 Intermediate
Surface modeling Aston Martin One-77 in the Alias surface from AUTODESK
Autodesk Alias

Creating a Worm Wheel in Creo Parametric 1.0

c0cd00a1
in Design & CAD
5 0 Beginner
Here's the answer for it..
PTC Creo Elements creo parametric 1-0

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

How to change from inch im mm in creo 2.0?

anhquoc38
in Design & CAD
5 0 Beginner
tutorial: see the img.
PTC Creo Elements inch cad creo unit change millimeter

How do i track changes by others?

Sara Sigel
in Design & CAD
5 1 Intermediate
Your partner can upload a new version, leave a sketch, or write a comment to let you know about a change. If you have notifications setup, then you'll get an email when any of these happen. https://grabcad.com/email/edit You can also compare changes between versions, which is very useful. For a visual comparison of what is different from one version to the next, see the steps, below.
GrabCAD Workbench file grabcad cad workbench management version revision

A Class OEM standard modelling and skills

Rags and Rust
in Modeling
4 0 Beginner
I have created a number of Tutorials for Autodesk Alias A Class Nurb modelling. These tutorials are based on things i do everyday as a professional car designer within OEM studios. Although these are done in Autodesk Alias which is the industry standard software they can be applied to any nurb based program you may have such as Rhino, Catia etc. 1. Scan data to A Class surface model 2. From a side view sketch to a clean concept model 3. Using blueprints to create a clean accurate A Class model 4. Using these skills to challenge yourself.
Autodesk Alias quality production scan concept nurbs automotive car class

Sweep with multiple sections

Sumit Luthra
in Design & CAD
3 0 Beginner
For this we have to use swept blend command.
PTC Creo Elements section sweep pro multiple blend

Proper Method to Produce Lobster-back Duct Bends

lawrie
in Drafting
3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing
Alibre Design

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.