Tutorials

  • Design & CAD ×
  • Autodesk Inventor ×
  • BlenderCAD ×
  • NX Unigraphics ×

How to model a Centrifugal Pump Body (Spiral construction) using Inventor 2014?

Constantin STANCESCU
in Design & CAD
73 18 Intermediate
We have to abide by all the conditions from the technical drawing Note: You can watch my live tutorial for modeling this part here: https://youtu.be/yxEAv2p31zw
Autodesk Inventor centrifugal_pump inventor_2014 ipt multi-body spiral coil

New approach in designing and modelling an Oil pump using Inventor 2016

Ebrahim Abu Has
in Design & CAD
107 13 Intermediate
Step by step tutorial videos, showing the easy way of modelling an Oil pump using Inventor 2016, how to create the parts, assemble them and drive gears, new approach make use of most Inventor specs, design center with some new tips & tricks ...
Autodesk Inventor ticks tips some splines parallel shafts keyways keys shaft design gears spur

Cap screws and machine screws

dea
in Drafting
65 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.
Autodesk Inventor screw cap

Mountain Bike Design

MANIKANTHA P
in Assemblies
30 10 Intermediate
Mountain Bike Design part 01 using unigraphics
NX Unigraphics assembly unigraphics bike mountain mtb

LEGO - 01 Basic Dimensions & Bricks Explained

dk
in Modeling
68 9 Intermediate
I get a lot of questions about how I create LEGO parts. This is Part I - The Basics. Most "standard" parts can be created using only simple math. Standard parts consist of square, circular, and angled blocks - regular geometric blocks. I will refer to BrickLink (www.bricklink.com/), but many others use similar methods: Peeron: http://www.peeron.com/ BrickOwl: http://www.brickowl.com/ Brickipedia: http://lego.wikia.com/wiki/LEGO_Wiki etc.
Autodesk Inventor bricks dimensions lego

How to model a curved spring

Jens Nielsen
in Modeling
27 8 Intermediate
Let me show you how to use some surface commands which combine in a 3Dsketch for the solid sweep. No coil command needed. on youtube at: https://youtu.be/wcB5OBTrqfA
Autodesk Inventor coil 3dintersection surface sweep spring

How to model a Control lever shaft using Inventor 2014?

Constantin STANCESCU
in Design & CAD
32 8 Intermediate
If you are really interested in modeling with Inventor (2014), try to apply every step with respect to their order and watch how you reach the model. You can watch the live modeling of this part with Inventor 2021 by using this link: https://youtu.be/gOkTy_oJdH0 Enjoy!
Autodesk Inventor

How to model a dodecahedron

Jens Nielsen
in Modeling
15 8 Intermediate
Let me show you how to model a platonic surface body and use it for a weldment structure. 3D-file at: https://grabcad.com/library/dodecahedron-32
Autodesk Inventor 3dsketch polygon

Robust Master Parts

ROTHMECH
in Modeling
1 6 Intermediate
Make robust designs using multi-body master parts.
Autodesk Inventor part master body multi

How to create spur gear in Siemens NX?

Hegedűs György
in Modeling
37 5 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4 UPDATE: At ~ 2:40 leave the Limit options at default (At Point). See the errata video for the reason: https://youtu.be/PUpdlyQcaOs
NX Unigraphics gear spur

LEGO - 02 Building Bricks with Parameters

dk
in Modeling
37 4 Intermediate
I don't get asked this but it is a very powerful tool and will make your life a lot easier. This also applies to other repetitive parts, not just LEGO bricks, and can be applied with the exact same methods.
Autodesk Inventor parameters lego

Radial engine Animation in NX

MANIKANTHA P
in Assemblies
10 4 Intermediate
Applications. Radial engines have several advantages for airplanes: They can produce a lot of power. A typical radial engine in a B-17 has nine cylinders, displaces 1,800 cubic inches (29.5 liters) and produces 1,200 horsepower.
NX Unigraphics animation mechanism assembly nx enigne design engine enigine radial unigraphics

How to model a truncated icosahedron with Autodesk Inventor

Jens Nielsen
in Modeling
12 4 Intermediate
Mix 2D- and 3D sketches to create this platonic body.
Autodesk Inventor

Create EYE Bolt Using Inventor

Mohit
in Design & CAD
4 4 Intermediate
Create EYE Bolt Using Inventor
Autodesk Inventor mechanical parts inventor eyebolt

Siemens NX 12 Surfacing: Step by Step Tutorial

Shuvam Kumar
in Modeling
23 4 Intermediate
Siemens NX 12 Surfacing Tutorial: Step by Step Tutorial Some Commands 1.Studio Surface 2.Bounded Plane 3.Sew 4.Shell 5.Combined Curve Watch All Video For Full Tutorial Video 1.Siemens NX 12 Surfacing: Step by Step Tutorial Part-1 https://youtu.be/-5c1hRNXSco 2.Siemens NX 12 Surfacing: Step by Step Tutorial Part-2 https://youtu.be/RgXmQEguql0 3.Siemens NX 12 Surfacing: Step by Step Tutorial Part-3 https://youtu.be/3Ym4L3O2e94 4.Siemens NX 12 Surfacing: Step by Step Tutorial Part-4 https://youtu.be/GlIwPYwUpnU 5.Siemens NX 12 Surfacing: Step by Step Tutorial Part-5 https://youtu.be/5RWytrc0PrU
NX Unigraphics tutorial modeling surface nc surfacing 12 nx siemens
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.