Tutorials

  • Design & CAD ×
  • JT ×
  • Onshape ×
  • Pro/Engineer Wildfire ×
  • Rhino ×

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

Tutorial: how to model revolving surfaces without degenerated point

Ferro
in Modeling
12 2 Intermediate
This tutorial shows how to reconstruct a portion of a revolving surface, in order to remove the degenerated point
Rhino patch boundary fair degenerated

Onshape Tutorial Exersice

Çağın Gergin @chagocad
in Modeling
11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29
Onshape onshape modellig loft free extrude

diverse shape translation to JT or STP

juergen grewe
in Translations
9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.
JT jt2go tcvis edge solid paint 3d mashlab pconplanner automapki sketchup

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

GIF : Guide to How to make Simple Single Collet ( Emerald Ring )

Patel Deepak
in Design & CAD
5 0 Intermediate
THE SERIES OF ANIMATED gif WILL GUIDE IN MAKING SIMPLET GRACEFUL RING.
Rhino educatinal solitaire emerald jewellery rhino ring

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

volleyball in Onshape

Jens Nielsen
in Modeling
4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.
Onshape volleyball

starlord Tutorial - image Pixel [ sampler ] with Rhino + Grasshopper

Matias Adrian Casciotta Gracia
in Modeling
4 0 Intermediate
éste es un Tutorial para convertir una imagen en geometrías tipo Pixel this is a Tutorial to convert an image into Pixel geometries Regards! subscribe! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig
Rhino programing image geometries modeling tutorial grasshopper rhinoceros pixel

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

Filling 6-sided holes in Rhino

Bobi
in Modeling
3 0 Intermediate
This tutorial shows how to fill a 6-sided hole surrounded by complex surface transitions in Rhino.
Rhino transition nurbs surfacing surface 6-sided hole blend rhino

Split Ring Shank Design Modeling in Rhino 3D (2018): Jewelry CAD Design Tutorial #42

PJ Chen
in Modeling
2 0 Intermediate
You will learn how to design a split ring with bead set on the ring shank in this tutorial. Suggested videos: Bezel Set tutorial ►►https://youtu.be/vuWBSxwdBw8 Halo Ring tutorial ►►https://youtu.be/VPT1LdA4vos Signet Ring tutorial ►► https://youtu.be/fsbqZH-hSlE Prong Set Tutorial ►► https://youtu.be/qxDI_7-tGHQ This tutorial is done by Rhino 6. The exact commands can be used with Rhino 5 and older version. PJ Chen Design Channel is about sharing Rhino 3D tutorials to students and professionals learning various Rhino 3D techniques. For more training course information that PJ Chen Design provides, Please visit our website at www.pjchendesign.com 👉 Share this video: https://youtu.be/BMoKZ-2JE2E 👉 Watch All FREE Video for Jewelry Design ►► https://goo.gl/aUPwz9 👉 Subscribe PJ Chen Design Channel ►► https://goo.gl/MJ4ExU 👉 Tell us what you like to learn about jewelry design ►► https://goo.gl/wAfJEJ ★☆★ If you found this video helpful, help me to spread the word by liking or commenting below. It helps me to reach more people and allow me to create more FREE videos! ★☆★ ✔ Like Our Facebook Page ►►https://www.facebook.com/pjchendesign/ ✔Visit Our Website ►► https://www.pjchendesign.com
Rhino 3d rhino cad design jewelry

How to analyse Pro Engineer component in Ansys 10.0 welding property?

harikrushna dodiya
in Design & CAD
2 0 Intermediate
u can weld through following step in workbench There are one "WELD" option in geometry. there u can create weld
Pro/Engineer Wildfire property weld

How to measure in Rhino?

Patel Deepak
in Design & CAD
2 2 Intermediate
Dimensions always measure as though the object were projected to the current construction plane. 1. use linear dimension for measuring length and width measurements. 2. use aligned dimension for diagonal measurements.
Rhino

Tutorial: How to make round diamond collet.

Patel Deepak
in Design & CAD
1 0 Intermediate
The series of jpegs will guide the way to make round collet
Rhino gem diamond rhino collet ring
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.