Tutorials

  • Design & CAD ×
  • Snagit ×
  • Alibre Design ×
  • Autodesk Alias ×
  • Rhino ×

Tutorial: how to model revolving surfaces without degenerated point

Ferro
in Modeling
12 2 Intermediate
This tutorial shows how to reconstruct a portion of a revolving surface, in order to remove the degenerated point
Rhino patch boundary fair degenerated

Filling basic 6-sided holes in Rhino

Bobi
in Modeling
8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.
Rhino rhino blend hole 6-sided surface surfacing nurbs transition

Make a Ring With Text in Rhino

JOSE
in Modeling
7 1 Expert
Make a ring with a text
Rhino rhino design jewelry

FREE Autodesk Alias Tutorial Day 1

Rags and Rust
in Modeling
8 0 Beginner
Education should be free... A friend, a collegue and like myself Adrian is an expert Alias modeller with extensive years of experience working with OEM design studios https://www.youtube.com/c/AdrianAutodeskAlias @a.biggins.design I will begin to upload tutorials that will teach you from the moment you open Alias for the first time, setting Alias up for efficient work flow and together build a full exterior CAS model and render it. In my opinion this is as close as you can get to seeing the work flow and theory we work towards within OEM studios day to day.
Autodesk Alias modeling modelling cas nurbs automotive car autodesk alias

Video Tutorials from Rhino 3D Tutorials

Alexandre Galin
in Modeling
6 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/
Rhino surfacing 3d rhinoceros taught self tutorials prototyping rhino3d

how to model a car in autodesk alias????

kodg
in Design & CAD
5 3 Intermediate
Surface modeling Aston Martin One-77 in the Alias surface from AUTODESK
Autodesk Alias

GIF : Guide to How to make Simple Single Collet ( Emerald Ring )

Patel Deepak
in Design & CAD
5 0 Intermediate
THE SERIES OF ANIMATED gif WILL GUIDE IN MAKING SIMPLET GRACEFUL RING.
Rhino educatinal solitaire emerald jewellery rhino ring

The Length And Width Of A Ring .

Beauty Roy Mondal
in Design & CAD
4 0 Expert
How to measure the length and width of a ring . https://www.youtube.com/watch?v=0zKmm4ZYi10
Rhino model 3d animation rhino about tutorial jewelry width length ring

Introduction to Pave setting, and its basic knowledge.

Beauty Roy Mondal
in Modeling
4 0 Expert
What a Pave Setting Is The pavé setting, pronounced “pa-vay,” comes from the French word “to pave,” as in paved with diamonds. By closely setting small diamonds together with minimal visibility of the tiny metal beads or prongs holding the stones in place, the effect is one of continuous sparkle.
Rhino cam cad modeling fashion jewelry rhino settings diamond setting pave

How to model the StMary30st in Rhinoceros3D and show design intent.

Riccardo Gatti
in Design & CAD
4 1 Beginner
Here my explanation on how to do
Rhino building rhino3d skyscraper london designintent gerkin foster

A Class OEM standard modelling and skills

Rags and Rust
in Modeling
4 0 Beginner
I have created a number of Tutorials for Autodesk Alias A Class Nurb modelling. These tutorials are based on things i do everyday as a professional car designer within OEM studios. Although these are done in Autodesk Alias which is the industry standard software they can be applied to any nurb based program you may have such as Rhino, Catia etc. 1. Scan data to A Class surface model 2. From a side view sketch to a clean concept model 3. Using blueprints to create a clean accurate A Class model 4. Using these skills to challenge yourself.
Autodesk Alias quality production scan concept nurbs automotive car class

starlord Tutorial - image Pixel [ sampler ] with Rhino + Grasshopper

Matias Adrian Casciotta Gracia
in Modeling
4 0 Intermediate
éste es un Tutorial para convertir una imagen en geometrías tipo Pixel this is a Tutorial to convert an image into Pixel geometries Regards! subscribe! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig
Rhino programing image geometries modeling tutorial grasshopper rhinoceros pixel

How do i add thickness to a polyline in Rhinoceros 3D

Patel Deepak
in Design & CAD
3 2 Intermediate
hi https://grabcad.com/mark.goody-2, following picture can guide you to add thickness to any curves by adding few simple steps while modelling.
Rhino bending rhino wire

Proper Method to Produce Lobster-back Duct Bends

lawrie
in Drafting
3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing
Alibre Design
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.