Tutorials

  • Dimensioning / Tolerancing ×
  • Simulation & CAE ×
  • Theory ×
  • Standards ×
  • Fusion 360 ×
  • Lagoa ×
  • SOLIDWORKS ×
  • ZW3D ×
  • GrabCAD Community ×
  • 3D Manufacturing Format ×
  • Other ×

Some concepts about DIN 5480 spline dimension Part 1

Carlos Soler
in Dimensioning / Tolerancing
35 8 Expert
For some questions that I received. I will upload some tutorials about DIN 5480 dimensions. This is a tutorial explaining some concepts on dimensions of the splines ruled by DIN 5480
SOLIDWORKS clearance tolerance reference diameter dimension din 5480

Some concepts about DIN 5480 spline dimension Part 3

Carlos Soler
in Dimensioning / Tolerancing
21 0 Expert
In this tutorial, I will explain the concept of addendum correction (modification) and how is applied to DIN 5480 splines
SOLIDWORKS joint connection gear modification correctio addendum 5480 din

Some concepts about DIN 5480 spline dimension Part 2

Carlos Soler
in Dimensioning / Tolerancing
12 3 Expert
Continuation of part 1. https://grabcad.com/tutorials/some-concepts-about-din-5480-spline-dimension-part-1
SOLIDWORKS teeth dimension 5480 din

100 + Mechanical Principle with 3D animation

Amit Mourya
in Kinematics
9 2 Beginner
Follow us on Instagram : https://www.instagram.com/engineer_know/ BuyMeACoffee: https://www.buymeacoffee.com/amitmourya support us on payapal : paypal.me/nobodyknow137 (it helps to create more and better content for 3d animation my pc system is constraint now but i am trying my best)
SOLIDWORKS mechanical engineering mechanism mechanical principle solidworks

Single Inspection Dimension for Holes

Stephen Nyberg
in Dimensioning / Tolerancing
6 1 Beginner
I was having a hard time figuring out a good way to dimension a hole with both the diameter and depth of a hole with GD&T in a singe dimension. This dimension also required inspection so I wanted the inspection circle around the dimension and have the properties linked to the model. I did a lot of searching on the internet and did not find a good solution. Here is my solution. please leave your comments if you have a better way to do this.
SOLIDWORKS gd-t hide-show annotations note drawing dimension hole inspection

Solidworks vba userfom

Mesut Yilmaz
in Dimensioning / Tolerancing
6 2 Intermediate
Hi everyone I made a design of elevator car frame in solidworks and can change the dimensions with vba macro userform. Macro runs on model opening and rebuild the model with new dimensions when clicking update button. Anybody can use the model who don't know anything about solidworks. Have a good day
SOLIDWORKS macro api vba solidworks

Charger

Ashek Amin
in Dimensioning / Tolerancing
6 4 Intermediate
Charger design by Solidworks
SOLIDWORKS solidworks

Static Simulation in Fusion 360! Bicycle Crank Arm Tutorial

Engineering Juice
in Simulation & CAE
5 0 Beginner
0:25 Simulation Start 0:56 Simplify 1:31 Materials 2:02 Constraints 2:58 DOF View 3:23 Loads 4:52 Solve In this tutorial, we will create a static simulation for our bicycle crank arm in Autodesk Fusion 360. We will simplify our assembly, to remove the fittings, then add a material, constraints and a load to the end of the arm. When we solve our assembly, we will end up with the amount of deformation. We will then run the simulation again once we core out the inside of our crank arm to see the difference in the analysis.
Fusion 360 static simulation tutorial lesson 360 fusion

Draw Third Angle Orthographic Projection

Muhammad Yunus
in Theory
5 0 Beginner
Shows how to make a third angle orthographic projection from isometric projection.
Other isometric angle third projection orthographic

(VIDEO) How to Size Isometric View (3D View) Detailing - Solidworks

Infinity Projetos Brasil
in Dimensioning / Tolerancing
5 0 Beginner
WATCH THE VIDEO TEACHING BELOW
SOLIDWORKS measure drafiting size dimension view isometric detailing solidworks

Using the 75% "rule" on Neck Finish.

Edgar Gidoni
in Dimensioning / Tolerancing
5 0 Beginner
This "rule of thumb" allows us to choose a safe value between a range that has a maximum and a minimum value. By using this rule we will be above the average value, but within the range, obtaining greater security in any case.
SOLIDWORKS tecnicursos bottleneck neckfinish dimensioning 75-rule

GD&T and Tolerance Stack-up Analysis

Prasertsak Naksakul
in Dimensioning / Tolerancing
4 0 Beginner
GD&T and Tolerance Stack-up Analysis for Design and Manufacturing.
SOLIDWORKS manufacturing design drawing tolerance dimension gd-t

SOLIDWORKS Basic 2D Drawing Tutorial | Section View| Detailed View | Drawing Tolerance| Sheet Format

Ibrahim Omer
in Dimensioning / Tolerancing
4 0 Beginner
Hi friends, welcome back to CADable. In this tutorial video we will learn about basics of SOLIDWORKS 2D DRAWING. I hope you like it. Here, I am using my previous 3d model (Practice Exercise 1) and its file is here: https://grabcad.com/library/practice-exercise-1-1 For making a 2d drawing, you need a 3d part, so i am using this model. Here, I have shown how to select sheet format, how to apply different drawing views from view palettes, how to apply automatic dimensions, how to apply manual dimensions, cross sections views, detailed views, isometric views, 3 standard views, dimensions with tolerances, basic, bilateral, symmetric, geometric tolerances etc. How to apply machining symbols, how to apply a text in 2d drawing. After creating the drawing, I have shown how to edit sheet format, applying a material, drawing name, title block, drawing name person etc. Lastly I have saved my drawing in PDF format and I also have checked page setup for printing the drawing. I hope you like it.
SOLIDWORKS tolerances format sheet detailed view sections tutorial solidoworks cadable drawing 2d basic solidworks

Static Stress Simulation: I-Beam Bending in Fusion 360! Tutorial

Engineering Juice
in Simulation & CAE
3 0 Beginner
How to do a static stress simulation on an I-beam in Fusion.
Fusion 360 beginner 2019 sketch modeling tutorial 360 fusion fusionsimulation

Solidworks Simulations |Non linear structural analysis of a lever machine

Ahmed Sakib
in FEM
3 0 Intermediate
Non linear static analysis of a lever machine will be carried out with Solidworks simulation module. @cadingal 0:11 Download Solidworks CAD Model of lever assembly 0:17 Start static simulation study 0:47 Define connections 01:16 Define loads & fixtures 02:05 Non linear analysis settings 02:38 Evaluate stress and deformation
SOLIDWORKS lever assembly fem solidowrks non linear static analysis solidworks non linear simulation
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.